3
Install handles (F)
on doors and drawers using the
nylon screw (G)
using the Phillips screwdriver supplied.
Step 3
Step 5
Center channel speaker option A.
If you decide to use your top/center drawer area for a center channel
speaker, the drawer may be easily removed. In order to do this, follow the
steps below.
Fully extend drawer and locate plastic lever
on drawer slide.
B
F
G
Gromet x 2
Simultaneously
on the LEFT side of drawer, lift UP on plastic lever AND on the RIGHT side
of drawer, push DOWN on plastic lever and pull STRAIGHT OUT the entire drawer assembly.
Remove drawer slides from interior side panels using a Phillips screwdriver.
+
Phillips Screwdriver
Detail: rear view of the door.
Step 4
Install both sliding back panels (B)
to the backside of the cabinet.
NOTE:
Velcro
straps are included as wire management for your convenience.
