Bdcom S5864, Руководство по установке оборудования, Страница: 16 / 25

S5864 Hardware Installation Manual
- 12
Figure 3-6 Connecting the 10GE SFP+ port and other Ethernet terminals
Caution: The switch shown in figure 3-5 does not represent the material S5864.
3.3.3 Connecting Ethernet Management Ports
S5864 provides 1 10/100/1000Base-T port. Each port has its corresponding MNG
indicator. The indicators are used to indicate the LINK/ACT state. The ports can connect
other Ethernet terminal devices through the UTP port and the direct-through or cross
network cable. The numbering order of the pins in the UTP port is the same as that in
the console port. See figure 3-6.
Figure 3-7 RJ-45 connector on the console port
Because the 10/100/1000Base-T ports of S5864 support the MDI/MDIX self-
identification of the cable, S5864 can adopt five types of direct-through/cross network
cables when it connects other Ethernet terminals.