Release Notes
This document is released under the terms of the Creative Commons ShareAlike 3.0 license.
35
• When flashing new firmware, re-try opening the device as sometimes it takes a while for the
underlying operating system to recognize that the device has rebooted in preparation for the flashing
operation.
• Hide Tilt Angle in ascent tab for devices that don’t have a gyro.
• Increase the width of data lines in the graphs to make them easier to read.
• Filter out speed and acceleration spikes caused by ejection charge firing when computing the
maximum values. This provides a more accurate reading of those maximums.
• Fix EasyMini voltage displays. Early EasyMini prototypes used a 3.0V regulator, and AltosUI still
used that value as the basis of the computation. Production EasyMini boards have always shipped
with a 3.3V regulator. Also, purple EasyMini boards sensed the battery voltage past the blocking
diode, resulting in a drop of about 150mV from the true battery voltage. Compensate for that when
displaying the value.
• Display error message when trying to configure maximum flight log size while the flight computer still
has flight data stored.
• Handle TeleMetrum and TeleMini eeprom files generated with pre-1.0 firmware. Those ancient
versions didn’t report the log format, so just use the product name instead.
E.7.3. TeleGPS Application
• New application designed for use with TeleGPS boards.
• Shares code with AltosUI, mostly just trimmed down to focus on TeleGPS-related functions.
E.7.4. Documentation
Documentation changes:
• Re-create the drill template images; they should print correctly from Firefox at least. Ship these as
individual PDF files so they’re easy to print.
• Add a description of the
Apogee Lockout
setting, which prevents the apogee charge from firing for a
configurable amount of time after boost.
