6 November 2006
1085200/5210/5220 Dodge X-Monitor
15
Insert the banjo bolt fitting through
the fuel line.
Install the other washer, and then
insert the fitting into the fuel filter
housing.
Start threading the fitting with your
fingers to prevent cross-threading,
and then secure it hand tight before
tightening with a wrench.
When installation is complete, run the engine and check for leaks.
Lift Pump Fuel Pressure (2003-2007)
The sensor mounts on the high-pressure pump located on the driver’s side of the
engine, top/front section. There are two different styles of throttle linkages on the
2003-2007 Dodge Ram pick-ups.
If the throttle linkage is
located near the top of the
engine, remove the
throttle linkage plastic
cover before proceeding.
Once the fuel pressure
port is located, remove
the existing factory banjo
bolt and install supplied
banjo bolt in X-Monitor kit.
When installation is
complete, run the
engine and check for
leaks.
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ship: 88 – 446 Harrison St, Sumas, WA 98295 Mail: PO Box 231, Sumas, WA 98295
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
