|
11
TROUBLESHOOTING
REASON
Battery empty
Suction opening is
obstructed or blocked
PROBLEM
Suction weak
Not Working
SOLUTION
Charge appliance
Remove obstructions
Battery almost empty
Charge appliance
Filter too dirty
Clean filter
Dust bin not fitted properly
Dust escaping from dust bin
Make sure dust bin is installed
correctly and lid is closed
CLEANING AND STORAGE
NOTE:
Do not immerse or soak the appliance in water or any other liquid.
•
Wipe the exterior of the unit and attachments with a damp cloth. If necessary, use a mild detergent and
warm water.
•
Do not clean with steel wool, abrasive detergents, or corrosive liquids like gasoline or acetone.
•
Place unit and attachments in a cool, well-ventilated place to dry.
•
Make sure unit and parts are completely dry before storage.
•
Store in a cool, dry place away from direct sunlight.
CLEANING ROLLING BRUSH
•
Regularly inspect the vacuum head for blockages and obstructions.
•
If the vacuum head is blocked and the rolling brush cannot rotate, the appliance will switch off and the
battery indicator lights will flash. Immediately clean the rolling brush.
1.
Remove the vacuum head from the pole or vacuum unit.
2.
Hold open the release button and remove the rolling brush.
3.
Clean the rolling brush of hair, dirt, and obstructions.
4.
Reinsert the rolling brush into the vacuum head. Insert the side opposite from the release button into
the slot, then insert the other side and lock it in place.
-
Make sure rolling brush is correctly installed before using the vacuum head.