10
|
CHARGING BATTERIES
•
There are two ways to charge the vacuum:
-
Hang the vacuum on the wall bracket (which is plugged into a wall outlet).
-
Insert one end of the power adapter directly into the changing port on the vacuum unit and the other
end into a wall outlet.
•
The battery indicator lights will flash and display the current charge.
-
Each bar represents 25% full.
•
Do not operate appliance during charging.
ECO MODE
•
Use ECO mode to save battery and vacuum with reduced noise.
•
Press the ECO button to turn ECO mode on/off.
-
The button will illuminate to indicate it is in ECO mode.
CLEANING DUST BIN/FILTERS
1.
Lift vacuum off the wall bracket or disconnect from the power adapter. Hold open the lock to remove
the dust bin.
2.
Hold the dust bin over a waste basket. Press the lid release button and empty the dust bin.
3.
Pull the HEPA filter from the filter frame on the dust bin. Unclip the two removable dust filters from the
sides of the vacuum unit.
4.
Tap the dust out from the filters over a waste basket.
5.
If necessary, rinse the filters with warm water and allow to dry. Make sure filters are completely dry
before reinserting.
6.
Insert the HEPA filter back into the filter frame and reinstall the dust filters on the sides.
OPERATING INSTRUCTIONS
1.
Lift vacuum off the wall bracket or disconnect from the power adapter.
2.
Fit the desired attachments to the vacuum unit.
NOTE:
All attachments, including the vacuum head and pole, are interchangeable. Select the appropriate
attachment for your cleaning job.
3.
Press the power button to operate the vacuum. The battery indicator will illuminate to show the
current charge.
4.
When finished, turn off vacuum and return it to the wall bracket to charge.
