3
Slide on a part B rear wheel and secure it with a part 4 large washer
and part 5 pin. Use needle nose pliers to bend the pin and lock the wheel
in place. Repeat on the other side. Snap a part D hub cap onto each wheel.
K
D
D
4
5
B
B
1
1
Pg. 7
TOOLS REQUIRED
PRODUCT ASSEMBLY
4
5
4
Slide the part K front axle into the steering column. Secure the axle with a part 3 small washer and part
5 pin. Note: an extra washer is included for adjustment.
Place the front axle into the designated slots, and secure it with eight part 1 screws, four on each side.
3
5