6
|
OPERATING INSTRUCTIONS
Note
: The preset code is
159
Input code and press the B button.
If code is correct, the safe will beep twice and the ready light (green) will turn on. If incorrect, the
yellow light will flash.
Note:
If three incorrect attempts are made, keypad will lock for 20 seconds.
Within 5 seconds, turn the knob and handle clockwise to open the door.
When finished, turn the handle counterclockwise to close the door, then turn the knob
counterclockwise to lock.
Programming new code:
With the safe open, press the red reset button behind the door. The safe will beep twice and the
yellow light will turn on.
Input a code (1 to 8 digits long) and press the B button.
The safe will beep twice to confirm the new code.
Battery Box:
If the keypad is depleted of power, use the battery box to power the keypad.
Install 4 AA batteries into the battery box.
Insert the plug into the input on the bottom of the control panel.
Input code and open safe.
Override key:
Remove the center cover from the control panel.
Insert a part A override key and turn it counterclockwise.
While holding the key in position, turn the knob clockwise to unlock, then turn the handle clockwise to
open the door.
Note:
Do not store keys inside the safe.
1.
2.
3.
4.
1.
2.
3.
1.
2.
READY
LOW
BATTERY
PROCEED
1
B
0
A
9
8
7
6
5
2
3
4
Override key
1.
2.
3.
