BCM RX845GL/IN845GL Скачать руководство пользователя страница 7

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

 

Chapter 1 

Introduction of RX845GL/IN845GL Motherboard 

1-1 

 Feature of motherboard 

The RX845GL/IN845GL motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package 
Northwood Processor with the Intel 845G/845GL Chipset delivers a high performance and professional 
desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 2.0GB. 

 
RX845GL motherboard use the Intel 845G Chipset Supports 533MHz System Bus in data transfer rate, 
IN845GL motherboard use the 845GL Chipset Supports 400MHz System Bus in data transfer rate. Both 
motherboards provided 133MHz SDRAM clock frequency to support DDR266 SDRAM. These 
motherboards offer ULTRA ATA 

100 

to provide speedier HDD throughout that boosts overall system 

performance. 
 
With integrated 2D/3D Graphics Accelerator which supports 256 bit graphics core, and supports hardware 
motion compensation assist for software MPEG/DVD decode,  makes this board a low cost alternative to a 
add on video card. For those willing a greater graphic performance. RX845GL provide an AGP 4X slot on 
board 

(For 1.5V AGP card only. No for 3.3V or Universal AGP card).

 This AGP slot will support 

either a 4X VGA card or Intel Digital Video Out ports add support for digital displays and TV-out .  
 
The RX845GL/IN845GL motherboard including PCI LAN Controller chip support 10/100 Mb/sec Base 
transfer rate.  

 
Its also has integrated onboard an AC’97 2.1 CODEC support 3D surround positioning Audio, which is 
fully compatible with Sound Blaster Pro

 that gives you the best sound quality and compatibility.  

 
With USB control as well as capability of expanding to 6 USB2.0 function ports to meet faster data 
transfer, built-in hardware monitor function. This enable system monitor and protect your computer. These 
motherboards provided design in hardware to protect BIOS from virus crash BIOS data.  

 
These motherboards provides special function in BIOS Setup to setting CPU Host clock step by step 
increasing. 

 
RX845GL/IN845GL provides high performance & meets future specification and needs.  It is really wise 
choice of computing solution. 

 
 
 
1-2 

 Specification 

 

Содержание RX845GL/IN845GL


















































Отзывы: