13
Example 1:
SiS 305 & ATi Rage 128 Pro AGP card those golden finger is compatible with
2X/4X mode AGP slot, but only can support 2X (3.3V) only. If you install
these cards in Intel® 845 based motherboard it will burn and damage the
motherboard.
Example 2:
We also find Diamond Vipper V770 golden finger is design for 2X/4X mode
AGP Slot. It can be adjusted the jumper for AGP 2X (3.3V) or AGP 4X (1.5V).
But the factory default setting is 2X (3.3V). If you install this AGP card in
motherboard without change the jumper setting to 4X (1.5V), it will burn the
motherboard.
2-6
Connectors, Headers
2-6-1 Connectors
(1) Power Connector (20-pin block) : ATXPWR
ATX Power Supply connector. This is a new defined 20-pins connector that usually comes
with ATX case. The ATX Power Supply allows to use soft power on momentary switch
that connect from the front panel switch to 2-pins Power On jumper pole on the
motherboard. When the power switch on the back of the ATX power supply turned on, the
full power will not come into the system board until the front panel switch is momentarily
pressed. Press this switch again will turn off the power to the system board.
AGP SLOT
