BCM BPR1000-PU/BPR1000-U/MOR600-N
When connect the power adapter to back panel power Jack
。
The power LED Will Turn ON
to indicate power has been applied.
C
：
Check WWAN LED
When Power ON the BPR1000, The BPR1000 Will Auto to detect and initial
Your Date
Card
。
Then status LED Will Flash ON and OFF One by one as BPR1000 Performs initialization
and Internet connection process
。
BPR1000 Will Auto Configured properly for your Internet
Service Account
。
It Will take a few minutes
。
When Complete, the status LED Will illuminate Green
。
Please refer the below Status
LED Activity table for each State
。
LED Color
Activity
State
None None
No Data Card Inserted or No
Internet Connection
Green + Red
Always On
System Initialization State
Green Always
On
High Speed Internet
Connection
Green
Flash at Same Time
Low Speed Internet
Connection
Power LED
4 V 0.1
