BCM Advanced Research SQ596, Руководство пользователя

Страница: 46 / 48

SQ596
19
Serial Port 2 IR Function
Makes serial Port 2 available to infrared applications. The options are enabled and disabled.
The default is disabled. (If configuration mode is set to auto, this option cannot be
modified).
Onboard Parallel Port
This can be used to change the default port address of the onboard parallel (printer) port.
378/IRQ7 Standard LPT1 address (Default)
278/IRQ5 Standard LPT2 address
3BC/IRQ7 Alternate LPT address NOTE: Cannot use EPP (or
ECP+EPP) with this configuration.
Disabled Printer parallel port disabled
Onboard Parallel Mode
This allows you to select the operation mode of the onboard printer port.
Normal Standard parallel port mode (Default)
EPP Bi-directional mode
ECP Fast, buffered
EPP/ECP Bi-directional and buffered
Password Setting
When you select this function, the following message will appear at the center of the screen
to assist you in creating a password.
NTER PASSWORD:
Type the password, up to eight characters, and press <Enter>. The password typed now will
clear any previously entered password from CMOS memory. You will be asked to confirm
the password. Type the password again and press <Enter>. You may also press <Esc> to
abort the selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A
message will confirm the password being disabled. Once the password is disabled, the
system will boot and you can enter the Setup freely.
PASSWORD DISABLED.
If you select System at Security Option of the BIOS Features Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter the