manualshive.com logo in svg

BCM Advanced Research MX852E-C10 Series, Руководство пользователя

Поделиться
Скачать
BCM Advanced Research MX852E-C10 Series Скачать руководство пользователя страница 12

MX855E/ MX852E-C10 Series 

12 MX855E/ MX852E-C10 Series User’s Manual

 

 

 

1.4 Manual Objectives 

This manual describes in detail the BCM MX855E/ MX852E-C10 Single Board.   
 
We have tried to include as much information as possible but we have not duplicated 
information that is provided in the standard IBM Technical References, unless it proved to 
be necessary to aid in the understanding of this board. 
 
We strongly recommend that you study this manual carefully before attempting to interface 
with MX855E/ MX852E-C10 series or change the standard configurations. Whilst all the 
necessary information is available in this manual we would recommend that unless you are 
confident, you contact your supplier for guidance. 
 
Please be aware that it is possible to create configurations within the CMOS RAM that 
make booting impossible. If this should happen, clear the CMOS settings, (see the 
description of the Jumper Settings for details). 
 
If you have any suggestions or find any errors concerning this manual and want to inform 
us of these, please contact our Customer Service department with the relevant details. 

Содержание MX852E-C10 Series



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды