￭
Preface
iv
CE Conformity
CE Conformity
Hereby, BCM Advanced Research declares that this device is
in compliance with the essential safety requirements and other
relevant provisions set out in the European Directive.
FCC-B Radio Frequency Interference Statement
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the measures
listed below:
￭
Reorient or relocate the receiving antenna.
￭
Increase the separation between the equipment and receiver.
￭
Connect the equipment into an outlet on a circuit diff erent from that to
which the receiver is connected.
￭
Consult the dealer or an experienced radio/television technician for help.
NOTICE 1
NOTICE 1
The changes or modi
fi
cations not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE 2
NOTICE 2
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
this device may not cause harmful interference, and
2.
this device must accept any interference received, including interference
that may cause undesired operation.
