BCM Advanced Research MX45GM2, Руководство пользователя

Страница: 22 / 78

22
1.3 System Memory
1.3.1 SO-DIMM Sockets Location
The motherboard comes with two 200-pin Double Data Rate 2 (DDR2) SO-DIMM sockets.
A DDR2 module has the same physical dimensions as a DDR SO-DIMM but has a 200-pin
footprint compared to the 184-pin DDR DIMM. DDR2 SO-DIMMs are notched differently to
prevent installation on a DDR SO-DIMM socket. The following figure illustrates the location of
the sockets:
1.3.2 Memory Configurations
You can install 512 MB, 1GB and 2GB DDR2 SDRAM SO-DIMMs into the SO-DIMM sockets
using the memory configurations in this section.
z Installing DDR2 SO-DIMM other than the recommended
configurations may cause memory sizing error or system boot
failure. Use any of the recommended configurations.
z Always install SO-DIMMs with the same CAS latency. For
optimum compatibility, it is recommended that you obtain memory
modules from the same vendor.
z Due to chipset resource allocation, the system may detect less
than 1 GB system memory when you installed one 1 GB DDR2
memory modules.
z
Make sure that the memory frequency matches the CPU FSB
(Front Side Bus). Refer to the Memory frequency/CPU FSB
synchronization table.