CI-203 Instruction Manual rev. 8/9/2016
1554 NE 3
rd
Ave, Camas, WA 98607, USA
Phone (360) 833-8835 Fax (360) 833-1914
[email protected] http://www.cid-inc.com
11
Format Storage
Pressing the UP/DOWN key switches the display to the
“format
storage”
mode screen. Be careful!
Formatting the storage space of the CI-203 will erase all data and all files. This is convenient when
starting a new year’s work,
but treat this command with care.
In the format storage mode the top line of the display will read “Clear all data”.
The bottom line of the
display will have the word “stop” to the left and “
enter
” to the right.
Clear all data
<stop> <enter>
To delete
every
file in your instrument, press the ENTER key. The instrument will erase
ALL
data
from the memory, leaving the maximum possible amount of memory free for use. To stop the deleting
process and exit Setup ‘Storage’ menu, press the STOP key.
To continue measurements, the user
must create a blank file.
Setup Time and Date
To change the time and date stamp on the CI-203, press the RIGHT key when
‘Time’
is highlighted on
the Setup Scanner menu. This utility allows the user to set-up the instrument in different time zones
or to adjust the time after daylight savings.
To change the time on the instrument, use the UP/DOWN arrows to change the values of the first row
(hour: minute: second). Use the LEFT/RIGHT arrow to highlight the appropriate column, make the
appropriate shift in time and press SAVE. To change the date and access the second row, press the
LEFT and RIGHT arrow keys
simultaneously
. The second row (month: day: year) should now be
highlighted and the date can be changed using the UP and DOWN arrow keys. When done changing
the date, press SAVE or STOP to clear any changes made.
Setup SDcard
The Setup SDcard menu selection is only accessible by CID technicians.
<stop> <save>
14:40:32
04:02:12
