BCE T-4 adjustable DESKING SYSTEM, Руководство по сборке

Страница: 2 / 16

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and injury.
T-4
®
Desking
Assembly Instructions
2
Tools Required:
3 /
8
" hex driver socket
Driver extension at least 2"
Phillips screwdriver
Note: Screens are optional. Skip
to page 4 “Attaching Cross Brace
and/or Wire Trough” if no screen
attachment is required.
Attaching Screen(s) (optional)
1. Carefully unpack all parts and place
screens onto a soft, protective surface.
Identify screens from the “Screen
Part Numbers” diagram & Figure 1.
2. Identify the applicable brackets
below from Figures 2, 3 & 4.
Note: All screen brackets must
be assembled to table(s) before
proceeding with table assembly.
Screens may be attached to brackets
at end of table assembly if desired.
a. Standard Leg Brackets: Used
to attach straight (A) and corner
(C & D) screens to standard legs
(Figure 2).
b. Screen-to-Table Brackets: Used
to attach end of run screen (B)
to underside of table worksurface
(Figure 3). These brackets are used
on non-adjustable tables only.
c. Corner Post Leg Brackets: Used
to attach corner screens (C & D)
to corner post leg.
3. Attach the brackets as follows:
a. Attach left- and right-hand
brackets to the standard legs
using the
1 /
4
"-20 x 1 /
2
" Allen
socket head screws (two per
leg). See Figure 2.
b. Attach left- and right-hand
brackets to the end screen B
using the
1 /
4
"-20 x 3 /
4
" Allen
socket head screws (Figure 3).
c. Attach left- and right-hand
brackets to the corner post leg(s)
using the
1 /
4
"-20 x 1 /
2
" Allen
socket head screws (Figure 4)
A
C
D
B
B
standard leg
standard leg
standard leg
corner post leg
corner desk
desk
Figure 1
right-hand
bracket
Standard Leg Brackets
(for straight and corner screens - A, C & D)
right-hand leg
left-hand leg
left-hand
bracket
1
/
4
-20 x
1
/
2
”
Allen head
screw
Figure 2
Screen-to-Table Brackets
(worksurface-to-end screens B)
right-hand
bracket
left-hand
bracket
end screen (B)
#12 x 1
sheet metal screw
1
/
4
-20 x
3
/
4
”
Allen head
screw
Figure 3
Corner Post Leg Brackets
(for corner screens - C & D)
left-hand bracket
(on left-hand of a
right-hand corner screen)
right-hand bracket
(on right-hand of a
left-hand corner screen)
1 /
4
-20 x 1 /
2
”
Allen head
screw
Figure 4
Screen Part Numbers
GSCR/_XXX/...where XXX denotes
table type and/or locations
A
STR (Straight) back of rectangles
and peninsulas
B
END (End of any table) mounts
to top
C
CLH (Corner LH) to the left-hand
of user on corners or shoes
D
CRH (Corner RH) to the right-hand
of user on corners or shoes
Straight Screen Brackets
SL - 55354L
SR - 55354R
CL - 55355L
CR - 55355R
EL - 55357L
ER - 55357R
Corner Screen Brackets
End-of-Run Screen Brackets
P