BCD-RGD-804P-MT
34
www.bcdvideo.com
Interface items
Configuration
Introduction
Factory setting
Port
1-n (Number of physical
ports)
The switch port number.
1-n
LACP Enabled
Select/not select
Controls whether LACP is enabled on this switch port.
LACP will form an aggregation when 2 or more ports are
connected to the same partner.
not select
Key
Auto/Specific(1-65535)
The Key value incurred by the port, range 1-65535 . The
Auto setting will set the key as appropriate by the physical
link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific
setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation
group, while ports with different keys cannot.
Auto
Role
Active/Passive
The Role shows the LACP activity status. The Active will
transmit LACP packets each second, while Passive will wait
for a LACP packet from a partner (speak if spoken to).
Not select
Timeout
Fast/slow
The Timeout controls the period between BPDU transmis-
sions. Fast will transmit LACP packets each second, while
Slow will wait for 30 seconds before sending a LACP packet.
Fast
Prio
1-65535
The Prio controls the priority of the port. If the LACP part-
ner wants to form a larger group than is supported by this
device then this parameter will control which ports will be
active and which ports will be in a backup role. Lower num-
ber means greater priority.
32768
5.2.2.8 Loop Protection
Enter [Loop Protection] navigation column. This page allows the user to inspect the current Loop Protection
configurations and set relevant parameters, click [Save] button to save changes.
Содержание BCD-RGD-804P-MT
Страница 1: ...1 1 847 205 1922 info bcdvideo com www bcdvideo com BCD214 RGD 804P MT USER GUIDE...
Страница 43: ...BCD RGD 804P MT 43 5 2 2 12 POE Enter POE navigation column Set the value of the PoE...
Страница 55: ...BCD RGD 804P MT 55 Scheduler Mode configure to Weighted interface show as below...
