5
ENGLISH
FRANCAIS
SP
ANISH
DEUT
SCH
④ AC MAIN INPUT
Once all connections to the amplifier, plug the power cable into
an outlet and turn the unit on. Your CD Player is now ready for
use.
Connections
④ LCD DISPLAY
The LCD display shows the various functions for the CD Player as
all major modes and settings.
⑤ CONTROL BUTTONS
This command allows you to adjust the output levels on the left
and right channels. At the center position, the output level of
each channel is equal.
PLAY (PLAY) / PAUSE
Press this button to start playback or resume playback after
Pause. If the disc tray is open, press this button to automatically
close the tray and start playback if the disc is loaded.
During playback, press this button to pause playback while
maintaining the playhead to where it is on the disc surface.
To resume playback at the exact time of the pause, press
PLAY / PAUSE.
SKIP / SCAN
Press «>>» or «<<» to move to the next or previous track.
Forward or backward in an accelerated manner, hold the «>>»
or «<<» button continuously. The optical pickup is then read
before the recording or backward at high speed.
STOP
Pressing once on the ‘STOP’ button stops playback and resets
the playhead at the beginning of the disc. The display returns
to the display of the number of tracks and total playing time on
the disc. If you programmed the CD player to play a selection of
tracks, the program will be stored in the player’s memory.
In the programming mode, you can remove a program by
pressing twice on the ‘STOP’ key.
OPEN / CLOSE
Press this button to open and close the disc tray.
① ON / OFF BUTTON
This switch allows shutdown or operation of the CD Player.
② DRAWER DOOR CD
This drawer is designed to receive the CD. Caution should
never manipulate the drawer by hand but still pass through the
control buttons on the front panel.
When the DISC TRAY open insert a facing down on the CD tray.
If the message «No Disc» appears on the VFD drive, the disc is
probably on the wrong side.
③ USB SLOT
Listen to you digital music files MP3 up to 320kbps by using USB
Driver (FAT32, max 32Go).
Under the CD Player
SWITCH ANTI-HUM (GROUND ON/OFF)
Your CD Player has a mains socket outlet
with a ground connection. The use of this
type of connection is recommended for
electrical safety reasons (including
wetlands). However sometimes this
connection «mass» is the origin of «hum» audible from the
speakers in a hi-fi system to solve this problem, the cancellation
of the ground connection is sometimes sufficient. To do this you
have, under the CD Player, a switch to choose to connect or not
the mass of the device to the mains.
Face avant et usages
Uses
