BC Acoustique EM702, Руководство пользователя, Страница: 6 / 16

6
① PHONE - HEADPHONES OUTPUT
Make sure the volume control is turned down before
connecting or disconnecting headphones. Listening at high
levels can cause permanent hearing damage.
This taken Jack size 6.35 mm allows connection of stereo
headphones. It is advisable to use a listener with an impedance
between 32 and 600 ohm headphones.
When the headset is connected, the output to the speakers are
then cut.
② DRAWER DOOR CD
This drawer is designed to receive the CD. Caution should
never manipulate the drawer by hand but still pass through the
control buttons on the front panel or remote control to proceed
to the opening or closing. When the DISC TRAY open insert a
facing down on the CD tray.
If the message "No Disc" appears on the VFD drive, the disc is
probably on the wrong side.
③ POWER - ON / OFF BUTTON
This switch allows shutdown or operation of the amplifier.
④ VFD DISPLAY
The VFD (Vacuum Fluorescent Display) display shows all the
visual information on all major modes, settings and indicators
of the stereo system.
⑤ VOLUME
This knob adjusts the output volume of the amplifier at the
speaker outputs.
⑥ USB
Connect your USB flash drive here to play your digital files in
MP3 and WMA formats.
⑦ INPUT - SOURCES BUTTON
This button allows you to select one of the sources of the
EM-702 and the signal sent to the speakers and headphones.
Each time you press the INPUT button, the mode changes as
follows:
CD

TUNER

AUX


DIGITAL

WIRELESS

USB
You can also press the corresponding different sources buttons
on the remote control.
SOURCES:
CD PLAYER
The CD player can play back recordings in MP3 / WMA CD-R or
CD-RW. Refer to the "Listening to the CD Player" section of this
manual for more information.
TUNER
Allows you to listen to FM RDS or AM radio. Refer to "Listening
to the radio" section for more information.
Connections and uses
AUX
This key activates the source connected to the RCA (line level)
input of the same name located on the back of the stereo
system.
USB
This button selects the listening to digital files you have stored
on your USB drive that will be connected to the USB port on
the front of the unit. For more information, refer to the section
"USB Playback".
WIRELESS
This key enables the WIRELESS connection to listen to music
from your smartphone or other wireless sources. For more
information, refer to the "WIRELESS device playback" section.
DIGITAL
This button activates the digital input on the back of the
amplifier. It allows listening to the digital source connected to
the amplifier with integrated digital-to-analog converter.
⑧ TUNER CONTROL BUTTONS
AM / FM
Select AM or FM by repeatedly pressing the "AM / FM" button.
MEMORY
Press the "MEMORY" button to store a radio station. The letters
"HE-M" will flash to let you use the buttons "-" or "+" to choose
a number between 1 and 40 memory to store the station.
Once you have selected your desired preset number, press again
the "MEM" button. It will appear on the screen "MME 03" if you
chose to store, for example, your station in the memory 03.
Wait three seconds so that the display will jump to the selected
FM or AM bandwidth so that you can continue your radios
research and storages.
BUTTONS :
Use these buttons to search for stations or switch from one
memory to another. For more information, see "Listening to the
radio" part of this manual.