BC Acoustique EM702, Руководство пользователя

Страница: 4 / 16

4
- Some countries do not allow the exclusion or limitation of
incidental or consequential damages or exclusions of implied
warranties. Therefore, the limitations or exclusions herein
may not apply. This warranty gives you specific legal rights,
in addition to other rights which vary from state to state or
country to country.
Warranty Connections to the stereo system
Make sure that the device is not plugged into the mains
before making any connections. It is also recommended to turn
off or disconnect all other devices associated while making
connections to the product.
Connect the speakers to the speaker terminals on the back and
the sources of the corresponding input jacks on the back.
IMPORTANT: Make sure you have set the voltage selector ⑧
to suit your country: INPUT VOLTAGE: AC110 (USA) and AC230
(EUROPE).
Connect the power cord to the connector on the one hand AC
Mains product and the other to a wall outlet. Turn the POWER
switch ③ on the ON position.
If the unit is equipped with a standby, then press the STANDBY
button to turn it on.
Press the input selector for the source you want to hear.
Basic instructions
Quick starting guide
WARNING: Be sure to turn off the power on your product before
making any connections. Similarly it is best to cut the power of
other devices you want to connect to your amplifier.
Rear panel
① SUBWOOFER OUTPUT
Connect this output to your active subwoofer.
② ANALOG INPUT (RCA)
Analog input is designed to connect sources «line level»
to your amplifier. These inputs are designed for
so-called «analog» signals (as opposed to «digital» signals).
Compatible cables are made with these type «RCA», they are
traditionally identified by a color code «RED» for the RIGHT
channel and «WHITE» for the LEFT channel.
ANTENNAS (Connecting the AM and FM antennas)
③ AM antenna: Use internal or external AM antenna and
connect there to one of the two terminals at the rear of the
unit.
When using an outdoor antenna, always connect a grounding
wire to the GND terminal. Leave the internal antenna
connected even when also using a connected outdoor antenna.
④ FM indoor antenna: Connect the included FM antenna
connector on the rear panel, deploy it and tune your favorite
station. Fix the antenna to a suitable location such as a window
frame or wall that gives the best reception and secure it.
FM outdoor antenna: In an area where FM signals are weak,
it may be necessary to use an outdoor FM antenna. Use a
three-element outdoor antenna (commercially available),
or a five-element antenna in a area where radio signals are
particularly weak, and use a 75 Ω coaxial cable to connect it.
Note: Disconnect the indoor FM antenna when using an
outdoor antenna.
⑤ DIGITAL INPUTS
Your stereo system has a built-in digital-to-analog converter.
Therefore it is possible to connect a digital source (such as most
modern television screens).
To ensure compatibility with all existing types of digital
terminals, the EM-702 has an "optical" socket and a "coaxial).
However this entry is unique and it is possible to connect one
device at a time.
The entry "optical" take precedence over the entry "coaxial" in
case you have wired both.