manualshive.com logo in svg

BBV Ex4 MK2, Руководство по установке

Поделиться
Скачать
BBV Ex4 MK2 Скачать руководство пользователя страница 2

 

IMPORTANT 

Please read the following points before servicing or installing. 

 

Pre-installation Checks -

 It is recommended that the unit be bench-tested prior to installation on the site. 

 
Safety During Installation or Servicing -

 Particular care should be taken to isolate the pan/tilt head in 

order to prevent operation while engineering work is being carried out.  In addition any ladder or other 
means of working on the receiver MUST NOT rest on the pan/tilt head as it is possible for the head to move 
when not expected. 
  

Safety Check -

 Upon completion of any service or repairs to the unit, safety checks should be performed to 

ensure that the unit is in proper operating condition. 
 

Co-ax Grounding -

 If an outside cable system is connected to the unit, be sure the cable system is 

grounded. 

 
Adhere to Safety Standards -

 All normal safety precautions as laid down by British Standards and the 

Health and Safety at Work Act should be observed. 
 

WARNING - 

TO PREVENT DANGER OF FIRE OR SHOCK, DO NOT EXPOSE THE INTERNAL 

COMPONENTS OF THIS EQUIPMENT TO RAIN OR MOISTURE. 

 
Damage Requiring Service -

 Servicing by qualified personnel should be carried out under the following 

conditions: 

(a)  When the power-supply cord or plug is damaged; 
(b)  If liquid has been spilled, or objects have fallen into, the unit; 
(c)  If the internal electronics of the unit have been exposed to rain or water; 
(d)  If the unit does not operate normally by following the operating instructions.  Adjust only those 
controls that are covered by the operating instructions, as improper adjustment of other controls may 
result in damage and will often require extensive work by a qualified technician to restore the unit to 
normal operation; 
(e)  If the unit has been dropped or the enclosure is damaged; 
(f) 

If the unit exhibits a distinct change in performance.  This indicates a need for service. 

 

Replacement Parts -

 If replacement parts are required, ensure that only replacement parts recommended 

by the product manufacturer are used. 
 
 
 
 
 

Additional information 

 

It is strongly recommended that this equipment is pre-
built in the installer's workshop in advance, to ensure
problem-free installation at the customer's premises. 

 

 

Содержание Ex4 MK2





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды