BBT PHD-71CC Скачать руководство пользователя страница 11

Страница: 11 / 18

WWW.BBTA.COM.AU

BBT-PHD-71CC

Warm Engine Start

1. Open fuel cap vent screw all the way (anti-clockwise).

2. Move choke lever to CHOKE or ON position.

3. Continue with Step 5 of Cold Engine Starting.

Hot Engine Start

1. Open fuel cap vent screw all the way (anti-clockwise).

2. Continue with Step 5 of Cold Engine Starting.

3. If engine does not fire, refer to Step 2 of Warm Engine

Starting.

DO NOT attempt to start engine in the following
ways:

•

DO NOT use starting fluid.

•

DO NOT spray flammable liquids or vapours into air
filter, carburettor or spark plug chamber.

•

DO NOT remove spark plug and pull on starter rope.
Flammable fuel can spray out & ignite from a spark from
spark plug.

OPERATION

Avoid injury! Always handle fuel in a well ventilated
area, outdoors, away from flames or sparks.

Avoid injury! Do not start engine if fuel is spilled. Wipe
off excess fuel and allow to dry. Remove engine from
area to avoid sparks.

Avoid injury! If auger is mounted to engine, all safety
guards must be securely on to avoid serious injury.

Avoid injury! Starter rope can cause an unanticipated
jerk towards engine. Please follow instructions to avoid
injury.

Avoid injury! Never leave engine running while
unattended. Turn off after every use.

Avoid injury! Never carry powerhead and auger
between holes while engine is running.

CAUTION

NOTE: CHOKE position is defined by moving the choke
lever as far to the ON position as possible.

Avoid injury! Make sure the unit is in a stable position
before pulling the starter handle.

Avoid injury! When the unit starts to fire or run, release
the throttle control momentarily with your right hand
and return your left hand to the handlebar position
to maintain control and stability of the unit with both
hands.

WARNING

SPECIFICATIONS

Model

XYEA50

Engine Model

XY1E50F-1

Engine Type

Forced Air-cooled 2- Stroke

Displacement

71cc

Max. Output

2.0kW

Fuel

Fuel And Oil Mixture(25:1)

Fuel Tank Capacity

0.8 L

Ignition System

C.D.I.

Starting System

Recoil

Gear Ratio

30:1

Max. Engine Speed

8500 r/min

Clutch Engine Speed

3700 r/min

Idle Engine Speed

2900 r/min

Auger Speed

0-280 r/min

Spark plug type /model

L7RTC/TORCH

Specifications subject to change without prior notice.

All manuals and user guides at all-guides.com

all-guides.com

Содержание PHD-71CC



















Результаты поиска

Содержание PHD-71CC

Отзывы:

Похожие инструкции для PHD-71CC

Бренды по названию

Популярные бренды

BBT PHD-71CC, Руководство пользователя

Результаты поиска

Содержание PHD-71CC

Отзывы:

Похожие инструкции для PHD-71CC

Бренды по названию

Популярные бренды