SSS3416TC
Owner’s Manual
9
AA
M6 x 15 Bolt
1 PCS
BB
Spring washer
1 PCS
CC
Flat washer
1 PCS
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
Step 7 (Install doors )
a) Insert the pin on the bottom of left door (L) into the
pre-drilled hole on the left side of cart base (Q).
b) Push down the pin on the top of left door and insert
it into the pre-drilled hole on left front side of front
beam (M)
c) Repeat the procedure with the right door (R) and
front beam (M).
d) Close
the
two
doors.
Step 8 (Install the body assembly with cart
assembly)
Note: Unpacked the hose assembly prior to
install the body assembly, and pull out
the hose to the cart side panel when go
ahead to this step.
a) Put the body assembly (A) onto the cart
assembly.
b) Align the holes on the body assembly with
the holes on the cart assembly
c) Insert the M6 x 15 bolt (AA), spring washer
(BB) and flat washer (CC) into pre-drilled
holes, and tighten the bolts by hand.
d) Go back and tighten all the bolts using the
screwdriver provided.
Step 6 (Tank baffle assembly)
a) Align the holes on the tank baffle (W) with the
holes on the left side panel.
b) Insert one M6 x 15 bolts (AA), one spring
washer (BB) and one flat washer (CC) into each
pre-drilled holes.
c) Tighten the bolts using the screwdriver provided
