SSS3416TBSN
Owner’s Manual
8
AA
M6 x 15 Bolt
8 PCS
BB
Spring washer
8 PCS
CC
Flat washer
8 PCS
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
AA
M6 x 15 Bolt
2 PCS
BB
Spring washer
2 PCS
CC
Flat washer
2 PCS
Step 3 (Storage basket and storage basket support
assembly)
a) Align the holes on the slide tracks with the holes on the
left of cart base (P).
b) Screw the M6 x 15 bolts (AA), spring washers (BB) and
flat washers (CC) into the pre-drilled holes of slide
tracks, and then tighten the bolts by hand.
c) Align the holes on the storage basket support (S) with
the holes on the slide tracks.
d) Screw the M6 x 15 bolts (AA),spring washers (BB) flat
washers (CC) into the pre-drilled holes of storage
basket support (S), then tighten all the bolts by hand
e) Place the storage basket (O) on the storage basket
support (S).
f) Go back and tighten all the bolts using screwdriver the
provided.
Step 4 (Front beam assembly)
a) Align the holes on cart left side panel (K) with the holes on
front beam (M).
b) Insert one M6 x 15 bolt (AA), one spring washer (BB) and
one flat washer (CC) into each pre-drilled hole, then
tighten the bolt by hand.
c) Repeat the procedure with hole cart right side panel (R) and
front beam (M).
d) Go back and tighten all bolts using the screwdriver
provided.
Step 5 (Latch magnet assembly)
a)
Align the holes in the middle edge of cart base
with the holes on the latch magnet (T).
b)
Insert one M6 x 15 bolt (AA), one spring washer
(BB) and one flat washer (CC) into the each
pre-drilled hole.
c)
Tighten all the bolts using the screwdriver
provided.
