GSF2818K
Owner’s Manual
9
Step 7 (Doors assembly)
a) Insert the bottom pin of left door (K) into the pre-drilled hole on the cart bottom panel.
b) Push down the top pin of left door
and insert it into the pre-drilled hole on the left end of cart front beam.
c) Repeat the procedure for the right door (L) assembly.
d) Close the two doors.
Step 6 (Tank clip and tank support assembly)
a) Insert the tank clip (I) into the two holes on
the cart bottom panel as shown.
b) Loosen two pre-installed bolts on the tank
support (X) and allowed 1/4 bolt’s length to
extend from tank support.
c) Hang the two pre-installed bolts on the
hole of right side panel (V) and push them
down to place.
d) Go back and tighten all the bolts using
screwdriver provided.
