BBQ GSC3219TA Скачать руководство пользователя страница 12

Страница: 12 / 24

GSC3219TA
Owner’s Manual

Step 9

a) Put the body assembly (B) on

the top of cart assembly.

b) Align the two holes on the left

top of cart assembly with the
two holes on the left of body
assembly.

c) Insert one bolt (BB) with one

flat washer (CC) and one
spring washer (DD) into each
pre-drilled hole.

d) Tighten bolts by hand until

secure.

e) Repeat the procedure for the

right top of cart assembly.

f) Go back and tighten all bolts

using the screwdriver
provided.

M6×15 bolt

4 PCS

M6 flat washer

4 PCS

M6 spring washer

4 PCS

Step 10

a) Loosen the three pre-installed bolts on

the left side of body assembly and
allow 1/4 bolt’s length to extend from
the left side of body assembly.

b) Align the holes on the left side shelf (A)

with the bolts extended from the left
side of body assembly.

c) Push down the left side shelf until it

locks into place. Tighten all bolts using
the screwdriver provided.

d) Align the hole on the right side of the

left side shelf (A) with the hole on the
left side of control panel .

e) Insert one bolt (BB) with one flat

washer (CC) and one spring washer
(DD) into each pre-drilled hole. (See
diagram to right)

f) Align the hole on the right side of the

left side shelf with the hole on the left
side of body assembly.

g) Insert one bolt (AA) with one flat

washer (CC) and one spring washer
(DD) into each pre-drilled hole towards
into the body assembly.

h) Repeat the procedure for the right side

shelf (S) and the right side of body
assembly .

i) Go back and tighten all bolts using the

screwdriver provided.

M6×30 bolt

2 PCS

M6×15 bolt

2 PCS

M6 flat washer

4 PCS

M6 spring washer

4 PCS

Содержание GSC3219TA

























Результаты поиска

Содержание GSC3219TA

Отзывы:

Похожие инструкции для GSC3219TA

Бренды по названию

Популярные бренды

BBQ GSC3219TA, Руководство пользователя

Результаты поиска

Содержание GSC3219TA

Отзывы:

Похожие инструкции для GSC3219TA

Бренды по названию

Популярные бренды