bbluv Rino, Руководство пользователя

Страница: 8 / 24

Deep cleaning your Rinö
1. Follow steps 1 through 5 of the Quick Cleaning section of this manual.
EN
Rinö
8
2. Immerse the collar of the suction tube
D
in
clean water, as shown below. Press and
hold the Power button
F
for 15 seconds to
clean the inner pump. Change the water
and repeat if necessary.
3. Water flows in and out
of the inner pump, as
shown below.
4. Remove the Rinö from the water once you finish cleaning. Press and
hold the Power button
F
for 30 seconds to allow the inner pump to dry.
5. Dry the collar of the suction tube
D
and reassemble the parts.
WARNINGS
• The Rinö is not a toy. Keep out of reach of children to prevent accidental
swallowing of small parts or accessories.
• The Rinö should always be used by an adult or a responsible person.
• The Rinö is not a medical device and is designed to be used solely for the
suction of nasal mucus. This device is not intended for use in the mouth or in
ears.
• Do not use in case of wounds, inflammation, or bleeding from the nose.
• The Rinö is intended for personal, not commercial use.
• Before use, make sure the silicone tip is firmly in place on the mucus
collection cup.
• If you do not intend to use the product for a long period of time, remove the
battery.
• In case of infection, fever, nasal irritation, or hemorrhage, immediately stop
use and consult your family doctor.
• The Rinö includes electrical parts which required protection when cleaning.
Please follow the cleaning instructions provided in the Cleaning and
Maintenance section of this manual.
Water goes in
Water goes out