BBK SMP242HDT2, Руководство по обслуживанию

Страница: 4 / 29

4
Please install the electrostatic-sensitive devices on conductor products such as aluminum foil to prevent static
build-up after disassembling from this DVB-T receiver.
The soldering iron must be earthed while soldering and unsoldering the electrostatic-sensitive devices.
Only antistatic solder can be used for electrostatic-sensitive devices disassembly. The electrostatic-sensitive
devices will be damaged by static without ESD prevention solder while disassembling.
Do not use Freon Volatile which may damage the electrostatic-sensitive devices by discharging static.
Do not take the new electrostatic-sensitive devices from the antistatic protection package unless you are
ready for installation. (Most electrostatic-sensitive devices will be packed with anti-static foam, foil or similar
conductive materials. And a lead wire to prevent short circuit.)
Please contact the core or circuit parts of the device to be installed with ESD protection package before carry
out the new electrostatic-sensitive devices from it. And make sure no power supply on the device and remember
other precautions.
Try to reduce body movements while assembling or disassembling electrostatic-sensitive devices. (Clothes
made of fabrics will build-up static by attrition. Feet lifts up from floor will also build-up static.)
All manuals and user guides at all-guides.com