BBI SEM Scanner 200 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 36

BBI SEM Scanner 200 Скачать руководство пользователя страница 17

ENGLISH (EU)

Page 17 of 36

OTH-SEM-IFU-

MULTI-LANG-0123 Rev D,

January 2018

Figure 10. SEM Scanner 200 is fully charged, initialized and ready for use

3.4.

Acquiring SEM Scanner 200 Readings

The SEM Scanner 200 automatically obtains readings when the electrode is applied with
appropriate pressure to an anatomical location (Figure 11).
Follow the steps below to acquire SEM Scanner 200 readings:

1.

Ensure that any surface moisture or matter is removed from the area on the skin being
assessed.

2.

Apply the electrode to the desired anatomical site with sufficient pressure for
approximately one second as indicated with the green bars on the Pressure Indicator. The
electrode must be in complete contact with the skin to acquire a proper reading. No
readings will display when the Pressure Indicator shows yellow bars.

3.

Confirm a reading has been taken by listening for the SEM Scanner 200 to emit a short
audio tone.

4.

Upon acquiring the first reading, the Status Indicator on the SEM Scanner 200 Display will

read, “1 Reading Taken.”

5.

Repeat steps two and three to obtain additional SEM Scanner 200 readings to complete
an assessment set of readings. With additional readings obtained, the Status Indicator on
the SEM Scanner 200 Display will update to show the total number of readings completed.

6.

See Section 3.5 for details on display when completing an assessment set of readings.

«
...
15
16
17
18
19
...
»

Содержание SEM Scanner 200





































Отзывы:

Нет отзывов