BBG KDAEC 150, Инструкция по эксплуатации

Страница: 6 / 11

Hod
3
USB
communication
is off Hold occurs
when the
key is pressed.
Hold is released
if is
pressed again or
time expires as
per Hti setting.
USB print
continuously. Hold
occurs when the
key is
pressed. Hold is
released if is
pressed again or
time expires as per
Hti setting.
USB prints and the hold
occurs when is
pressed. If is
pressed a second time
print will occur again.
Hold is released if
is pressed again
or time expires as per
Hti setting.
13.2 TECHNICAL PARAMETERS
The technical parameters allow adjusting of the scale for accuracy
and speed. See the below for the complete list of parameters.

Switch off the scale.

Hold the key and then press momentarily.
Release the key. The display shows the first technical
parameter to set the filter “
FiL x
”.

To exit the parameter setting at any time, press the key.

To scroll through the technical parameters, press the
key (which will advance to the next parameter).
15
3.3 SETTING UP
NOTE:
When moving the scale, take care to prevent bending of the cable and
connector too much as over a period of time this can weaken the wires in the
connector and cause malfunction.
4.0 KEYPAD
Turns the scale on or off only
Sends data via USB and combines with Hold functions, if
enabled
Selects kilograms, pounds, ounces or pounds-ounces
Sets the display to true zero or net zero by storing the current
weight in the tare memory
4