Bazzaz F1084, Инструкции по предварительной установке

Страница: 6 / 12

7>GROUND
1. Route the Bazzaz fuel harness’
ground lug past the TPS. Attach the
lug to one of the bolts on the side of
the cylinder. We recommend using
an engine case bolt.
8>ROUTE/CONNECT
8.1
SCOTCHLOK CRIMPED ONTO
EXPOSED RED/SILVER WIRE
1. Locate the factory diagnostic connector in the rear
of the bike, beneath the rider seat.
2. Route the 12V power connector (labeled
with orange tag) to the diagnostic connector.
3. Carefully open up the factory
harness (to expose the wiring)
by making a cut in the sheathing
where the tail light harness
enters the rest of the factory
harness.
4. Crimp a supplied Scotchlok
onto the exposed red/silver wire
and insert the 12V
switched power connector into
the Scotchlok.
BAZZAZ GROUND
BAZZAZ
CONNECTOR