9
The trampoline / enclosure is now fully assembled.
Make sure that all parts are securely attached. Fimiliar-
ize yourself and all users of the trampoline/enclosure
with the safety precautions, use and instructional
materials, and care and maintenance instructions in this
manual before using.
14.
Disassembly
To disassemble the trampoline enclosure, follow assembly steps 1 through 13 in reverse order. Do not attempt to
disassembly any trampoline frame components before the springs and bed have been removed. Use gloves to
protect your hands from pinch points during disassembly.
12.
14.
13.
12
10
16
14
12
12
Webbing loop
Door
Webbing loop
V-Ring
Cord
13
Note: During steps 12 and 13, you will “sew” the
lower edge of the netting(12) to the V-ring and
webbing loop on the bed using the cords(16).
Locate the V-ring closest to the door. Thread one
end of a cord(16) through the lower edge of the
netting(12) above the V-ring and then thread the
cord through the V-ring. Tie the netting to the V-ring,
by making a double knot in the cord.
Thread the cord(16) through the lower edge of the
netting(12) to the V-ring and webbing loop. Repeat
this procedure until the entire cord is threaded
through the netting, V-rings and webbing loops as
shown.
Keep the cord tight. Tie the end of the cord to the
last V-ring that it reaches.
Tie a second cord(not shown) to the last V-ring
reached by the first cord. Thread the second cord
through the netting(12), V-rings and webbing loops
as described above. Repeat this procedure with the
remaining cord until the last cord reaches the first
cord. (Note: The last cord may overlap the first
cord.)
Make sure that the netting is sewn to every
V-ring and webbing loop on the trampoline bed;
the netting below the door must also be sewn to
the V-rings.
