background image

F

EATURES AND BENEFITS

DC Offset Protection

This circuit protects the output of the amplifier against DC voltage.   If for some 
reason DC voltage is detected at the output stage, the amplifier will shut down 
protecting the speakers from direct current. 

Short Circuit Protection

The circuit protects the amplifier from damage due to a short found in the speakers 
or wiring. If one of the speakers or its wiring comes in contact with ground, the 
amplifier will shut down.   To resume normal operation, correct the problem and 
turn the head unit off, then back on.  The amplifier will reset and play again.

Thermal Protection

To protect the amplifier circuitry against damage caused by prolonged exposure to 
high temperatures, a thermal protection circuit is activated if the amplifier reaches 
excessively high operating temperature.   Once the thermal circuit is activated, the 
amplifier will shut down to cool off.  The amplifier will automatically turn back on 
once it cools down to a safe operating temperature.

Power Indicator

The diagnostic L.E.D. Illuminates green when the amplifier is on and receiving 
power.

Tri Mode Capable

If so desired, the amplifier may be run in stereo and mono at the same time.  For 
example, this feature would allow you to run a pair of mid and tweeters in stereo 
and a sub-woofer mono.

Built-in Crossover

The “EL”amplifiers include a built-in variable **high and low pass crossovers.   The 
crossover features a variable frequency selection (60Hz ~ 400Hz) for precise high or 
low pass filtering. **Except EL1500 which has a 40 ~ 120Hz low pass filter.

Auxiliary Output

The “EL”amplifiers include a auxiliary output for a daisy chain connection of an EL 
Bazooka

d

 Amplified Bass Tube.

Power and Speaker Distribution Blocks

Heavy gauge bare wire distribution blocks are provided for maximum power and 
signal transfer with minimal resistance.

3

Содержание EL1500





















Отзывы: