BayTech DS73, Руководство пользователя

Страница: 6 / 19

6
1 GENERAL INFORMATION
The DS73 and the DS73TP peripheral communications module supports remote access to TCP/IP Ethernet networks
by using the DS-Series Data Switch with a modem module installed. Remote users can dial into the DS-Series unit
and connect to network hosts from anywhere at anytime. Both remote in-band and out-of-band management is
available by using one DS-Series data switch. Use the DS73 module for in-band network management. And use the
DS74, EIA-232 module for out-of-band management.
Remote workstations and PCs connect to the DS73 using a dial-up PPP session. This offers dial-up users a low cost
IP network link suitable for remote access to the network.
IMPORTANT: You should determine what types of peripheral modules you have installed in your DS-Series unit in
addition to the DS73 peripheral module. You should familiarize yourself with the various operation modes of the
installed peripheral modules. A brief operational description of each peripheral module is provided in the DS-Series
Owner’s Manual.
2 SPECIFICATIONS
PROTOCOLS: PPP, TCP/IP, ARP & ICMP
NETWORK INTERFACE: Ethernet; IEEE 802.3 compliant, 10BASE2 (thin coax,
BNC) and 10BASE-T (twisted pair, RJ-45). Automatic media and frame selection. The DS73 has
both 10BASE-T and 10BASE2 connectors. The DS73TP has a 10BASE-T connector.
FRAME TYPES: Ethernet II & SNAP(802.3)
SPEEDS: 10 mbps
BUFFER SIZE: 256 KB
SECURITY: Password protected log-on procedure
INDICATORS: Green LED - Link integrity
Red LED - RX/TX
Red LED - Connection status(CX)
POWER REQUIREMENTS: Supplied by DS-Series base unit.
+5 VDC, 300 mA
ENVIRONMENT: Operating Temperature Range: 0° to 70° C.
Storage Temperature Range : -40° to 80° C.
Humidity : 5 to 95% RH.