Model # ARI3N1CGT
Bayside Furnishings
®
Page 6
Factory No. 10944
Assembly Instructions
4. To remove the drawers from the Drawer Box (G), pull the drawers all the way out, then
simultaneously push the plastic release lever of the ball bearing slide up on one side and
down on the other side, and then pull the drawers completely out.
NOTE:
You must remove
the drawers to attach the drawer box.
5. Set the Drawer Box (G) onto the Spine (D) with the drawer housing facing up and attach it to
the Bottom Metal Frame (C). Insert four 1-1/2” Bolts (4) with the Washers (5 and 6) through
the pre-drilled holes on the Bottom Metal Frame (C) and screw into the threaded inserts
underneath the Drawer Box (G).
DO NOT
tighten the bolts in this step.
G
C
G
C
4
5 6
C
G
Lock Washer
(4 used in this step)
⑤
Flat Washer
(4 used in this step)
⑥
G
1-1/2” Bolt
(4 used in this step)
④
