Model # ARI3N1CGT
Bayside Furnishings
®
Page 25
Factory No. 10944
Assembly Instructions
41. The Sensor/Sound Shelf (N) provides two options: position above the TV or below the TV.
Depending on the option you prefer, slide the SSS Spine (M) onto the Mounting Frame (K)
properly. Adjust the height of SSS Spine so that it will be the correct distance above or below
your TV and attach it in place using the ½ inch Bolts (2) with the Washers (5 and 6).
42. Attach the Monitor Brackets (LL/LR) to the back of the television following steps 25 & 26, or 27
& 28, depending on the type of TV that you own.
43. Once the Monitor Brackets (LL/LR) are attached onto the back of television, ask for assistance
to lift the television up to attach the Monitor Brackets onto the Mounting Frame (K). Set the
hooks on the Monitor Brackets over the Mounting Frame and then lower them onto the bars of
the Mounting Frame. Proceed to center the television.
44. If you want to adjust the tilt, ask for assistance to hold the TV steady before you start to adjust.
Simply turn the both Tilt Adjustment Knobs on the Monitor Brackets (LL/LR) with the 3/16”
Allen Wrench to adjust your TV to provide optimum viewing and minimize glare. When the TV
is in its intended position, tighten both Lock bolts with a long Phillips screwdriver until they hit
the underside of Mounting Frame (K) to ensure your TV is safe and secure.
45. Repeat the step 24 to install the Sensor/Sound Shelf (N) onto the SSS Spine (M).
46. Place the assembled console under your TV. Finally, connect the A/V and power cables to your
TV. You are now ready to enjoy your wall-mounted Flat Panel TV.
