Bayne Thinline DTL 1116, Руководство по эксплуатации и запасным частям, Страница: 6 / 44

Document Number: 1900-0098 Issue Date: 01/15/08 Revision No: 003 Page: 6 of 44
II. Mounting hand valve(s) on the truck :
1. Choose and mark an acceptable location(s) on the side(s) of the truck to mount the
hand valve assembly(s) (
figure I-2 ).
2.
Remove the mounting bracket(s) from the hand valve assembly(s) and weld to the
truck.
3.
After the weld has cooled, paint the mounting bracket(s) to match the truck color.
4.
After the paint has dried, reassemble the hand valve assembly(s) on the mounting
bracket(s).
figu
re I-2
III. Mounting diverter valve on the truck :
1. Choose and mark an acceptable location to mount the diverter valve assembly.
2.
Weld diverter valve mounting bracket to the truck.
3.
After the weld has cooled, paint the mounting bracket to match the truck color.
4.
After the paint has dried, bolt the diverter valve to the mounting bracket using the
1/4” bolts, washers, and elastic lock nuts.