Bayne Revolution HD 1999-0520, Руководство по эксплуатации и запасным частям, Страница: 22 / 52

Issued June 2017
Revision No: 001 Printed in U.S.A.
Copyright 2017, Bayne Premium Lift Systems
Actuator Assembly Instructions
18
ACTUATOR ASSEMBLY INSTRUCTIONS (CONTINUED)
5. Coat the head portion of the racks (2) ( Figure 13 ) with STP Oil Treatment. Install the racks, head portion up with
the teeth facing the flanges of the actuator body, into the dual set of bores in the body. Simultaneously slide the
racks into the bores so that the racks mesh with the pinion in the same position. Rotate the pinion shaft to engage
the racks into the pinion.
Figure 13.
6. Check the position of the racks in the pinion by making sure both racks seat against the actuator body at the same
time and also when the racks are seated against the body, the key ways on the pinion shaft should be facing down
toward the table and mounting flanges on the actuator body as shown in Figure 14.
Figure 14.