Operating Manual for Sea Daze 4788 Bayliner
Sea Daze 160323.doc
Page 13 of 44
Last Revision August 11
th
, 2015
Operating the E127 systems:
The E127 and E7 controls are a highbred of touch screen activated, push buttons and joystick. For some critical
functions only the buttons and joystick are used,
a touch screen response may not be allowed
. This is a safety
feature to prevent inadvertent actions from unintended touch of the screen while underway.
An example of this
is responding to the autopilot alarms to engage or disengage course tracking. This must be done by pushing
in on the joy stick.
Press the power on button in the lower right corner of the E127. While the E127 initializes you may turn on the
E7 MFD and i70 data displays. Press the button in the lower left corner of the i70 displays to turn them on.
The E127 will require you to accept /acknowledge a safety disclaimer. Press in on the joystick control in the
top right of the E127 MFD; the E127 will default to the navigation chart screen.
The user manual for the E127 is electronic media. You may view the manual any time even while the unit is in use for
navigation. This is best viewed in a split screen mode selected from the home screen. The home screen is activated by
pressing the “Home Button” to the right of the screen. Use the touch screen to activate the split window configuration
that shows the manual.
Operating the i70 Data Displays:
Sea Daze has four i70 data displays, two in the pilot house and two on the fly bridge. The i70 displays have
several pages configured to show different collections of information for different navigational situations. You
may scroll through the different pages with the up-down arrow keys to present the information best suited for
the type of maneuvering you may be performing. For close quarters/marina you may want the large rudder
angle and depth displays. When underway following a route you may find the pages with route and waypoint
information most useful.
Operating the E7 systems:
The E7 display operates similar to the E127 and will be default to a split screen showing weather graphics in the
left half of the screen and a rudder indicator and course data/navigation information to the right. You may use
the drop down menu to switch between a split screen, or to display a full screen of the weather, or the data
displays.
The E7 may be displayed and controlled on your mobile device. This network is available when the E7 MFD is on. The
network ID is “Sea Daze II” and the Pass Code is “Sea Daze II”
3.4.5
Planning for navigation
Zoom in at your start location sufficient to identify objects and hazards. Use the touch screen or joystick to
position the cursor over your intended start point. From the menu select navigation, scroll down the menu with
the joy stick, or the rotating color at the bottom of the joy stick and select the “Build Route” option. Select
place waypoint (WP) from the menu. Position the cursor to the next waypoint you desire to create and select
place waypoint again. Continue to position the cursor and place waypoints until you are satisfied your course is
sufficient. Scroll the menu using the joy stick / rotary color and select finish/save to close out the course.
