BAYKAL HGL C Series, Руководство пользователя

Страница: 68 / 104

BAYKAL
EDITION NO : HGL SECTION :
DATE OF ISSUE : November 2009 PAGE : 68
OR !
Figure 6.5.6.15
6.
!
!
!
If you want to finish programming, press the programming key. Thus the
led on the key will stop flashing and the position display will indicate the first
position you have written in the cycle 01.
Now you are in the program reading phase
.
By pressing enter key, you can see all positions, repetitions and cycles
you have written.
If you want to change any position;
a. Using the enter key, select the position or repetition in any cycle.
b. Press the programming key . The display will begin to flash
c. Write the new value.
d. Press enter key.
If you want to cancel the program;
a. Using enter key, select the repetition in the first cycle.
b. Press the programming key
c. Write 00 for repetition
d. Press enter key.
If you want to cancel one or more cycles, in that cycle, press the
programming key and write 00 for repetition value. Press enter key
7. Congratulations!!!
You have finished writing program.
Press stop key. You will see the next empty program (programmable