29
Bench Scale Assembly
• Assembly requires two people.
• The Bench Scale Assembly ships on a pallet as part of the Pump Station Assembly (previously shown on page 19).
• Remove all components and check for any damage or missing parts that may have occurred during shipping
and report it IMMEDIATELY!
Step 1:
Set the back two Level Feet in the Scale Position Plates, as shown.
• The scale must be level! Adjust the Scale feet - remove the stainless cover and use the level bubble in the middle until
the scale sits level on the floor
Note: Do not run 5pin or 8pin signal cables parallel
to Power cable. Do not run within 8” apart. If the
Power and Signal cables must cross, it should be
perpendicular.
Содержание ON DEMAND
Страница 1: ...ON DEMAND INSTALLATION GUIDE ...