Multifunction Baby Bottle Warmer
EN
8
Operation
!
Attention:
Never use the bottle warmer without water in the heating tank!
■
Stand the bottle warmer on a horizontal and stable surface .
■
The steam that is released during the warming process is hot . Keep your hands away
during the warming process .
■
Never use the appliance without the steam grid A
4
located inside the body of the
appliance A
6
!
Warming up baby bottles
■
Pour 110 ml of water into the body of the appliance A
6
, into which you have placed
the steam grid A
4
.
■
Place the baby bottle inside the body of the appliance A
6
and close the lid A
1
of
the bottle warmer . Check that the lid A
1
has properly adhered to the body of the
appliance A
6
.
■
Always place a fully assembled baby bottle into the bottle warmer including its screw
top and nipple (without the dust cap) . Make certain that you pour water into the bottle
warmer before turning it on .
■
Never allow water to rise above the neck of the bottle or to spill over the edge of the
bottle warmer .
■
Check that the control dial on the control panel A
5
is in the "OFF" position B
3
and
plug the bottle warmer into a power socket .
■
Select the warming method by turning the control dial right towards the symbol
"MILK" B
2
.
■
The indicator light B
1
signalises that the bottle warmer is running and will shut off
automatically when the temperature in the bottle warmer reaches 40 °C . This is the
expected water temperature around the bottle . This is not the food temperature .
■
After reaching 40 °C, the water temperature is maintained at the same level until the
appliance is turned off by turning control dial left towards the symbol "OFF" B
3
.
■
If you decide to immediately use the bottle warming function again, it is necessary
to first allow the appliance to cool down completely . Other functions of the bottle
warmer operating at higher temperatures – warming up baby food, steam cooking or
sterilisation can be used immediately after warming up baby bottles .
■
Always test the food once it reaches the desired temperature, immediately remove it
from the bottle warmer .
■
Shake the baby food or milk after taking it out of the bottle warmer . Check the
temperature of the food or milk by dripping a little on your wrist .
