Baby bottle and food warmer
EN
13
■
If on the other hand you find that at the end of the warming cycle that the baby food is too hot, allow the meal
to cool down to the required temperature, check it by tapping it against your wrist and next time you can pour
a little less water into the heating tank A
3
.
!
Attention:
If you leave the baby food jar in the bottle warmer longer than specified in the table, the baby food may
overheat .
■
Never allow water to rise above the neck of the jar or to spill over the edge of the bottle warmer .
■
Check that the switch B
2
is in the "OFF" position (turned off) and plug the bottle warmer into a power socket
using the power cord in socket A
7
.
■
Select the warming method by setting switch B
2
to home warming (picture of a house) .
■
Press the ON switch A
4
.
■
The indicator light A
5
signalises that the bottle warmer is running .
■
The ON switch A
4
cannot be used for turning off the appliance . The bottle warmer will automatically turn off
at the end of the warming cycle .
!
Attention:
The steam that is released during the warming process is hot . Keep your hands away during the warming
process .
■
If you wish to turn the bottle warmer off at any time, set the switch B
2
to the middle OFF position (turned off)
and unplug the power cord A
7
from the power socket .
■
At the end of the warming cycle, immediately take the jar with the food tray A
6
out of the bottle warmer and
set the switch B
2
at the rear of the bottle warmer to the OFF position (turned off) . Then, please unplug the
appliance from the power socket .
■
After warming up the food, use a spoon to check that it is not too hot . Carefully dry the jar before serving the
food to a child .
b. In-car use
!
Attention:
Do not use the bottle warmer in a car while driving, the water inside could reach a high temperature and cause
burns . To prevent discharging the car battery, we recommend that the engine is running during the warming
process .
■
Never use the bottle warmer without water in the heating tank!
