Digital Steam Steriliser with Dryer
EN
10
Note:
Thoroughly wash your hands before touching any sterilised items .
■
Disconnect the appliance from the socket and wait until it cools down completely .
■
Pour out any remaining water from the base
A
3
and wipe it dry .
Cleaning the appliance and removal of limescale deposits
Cleaning
■
After every use, disconnect the steriliser from the power socket and allow it to cool down .
■
For hygiene reasons, pour out any remaining water from the base
A
3
.
■
Clean the outer and inner side of the steriliser base
A
3
using a damp cloth .
!
Attention:
Do not clean the steriliser, its parts or its accessories using abrasive products, chemical solvents, cleaning
products, alcohol, sharp utensils or steel wool .
!
Attention:
Never place the steriliser directly under running water or submerge the appliance or its parts and accessories
in water or other liquids!
■
Never wash the steriliser in a dishwasher! The lid
A
3
and stand
A
2
can be washed in warm water with
kitchen detergent .
■
After cleaning it, store the steriliser in a clean dry location .
Removing limescale deposits
■
When using the steriliser, small stains may appear on the heating element in the base
A
3
. These are
accumulated limescale deposits . The harder the water, the faster limescale deposits will form .
■
Disconnect the steriliser from the power socket and allow it to cool down .
■
It is recommended to remove limescale deposits from the appliance every 4 weeks to ensure further effective
operation of the appliance .
■
Mix 15 ml of white vinegar with 15 ml of hot water and pour this solution into the bottle warmer . Allow this
solution to act for approximately 30 minutes in the steriliser base
A
3
and then pour it out .
■
Never turn on the appliance while the water and vinegar solution is in the steriliser base
A
3
.
■
After emptying out the steriliser, repeatedly clean the outer and inner side of the bottle warmer using a cloth .
In the event that despite this limescale deposits continue to appear, repeat the limescale removal procedure .
Technical specifications
Model number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BBS 3030
Voltage and power input of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . 220–240 V ~ 50 Hz, 600 W
Protection class against injury by electrical shock . . . . . . . . . . . . . . . Protection class I .
Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambient temperature: 7 °C to 37 °C
