Bay-Tek Skee Ball, Руководство по обслуживанию

Страница: 31 / 34

31
GENERAL TROUBLESHOOTING
CAUTION: High voltage is present in some areas of the alley (power supply, SCR, solenoid, etc.). Unplug line
cord before performing any troubleshooting.
PROBLEM RECOMMENDATION
NO DISPLAY 1. Make sure power is applied to the alley.
2. Check the connections on the cable from the
controller to the display.
3 Replace display with a known good display.
4. Replace controller.
DISPLAY NOT SHOWING PROPER READOUT 1. Inspect cable for good connections.
2. Check connectors
3. Replace display with a known good display.
BALL COUNT NOT ACCURATE 1. Clean Sensor
2. Adjust ball count sensor towards the ball if it does
not count the ball.
3. Adjust the sensor away from the ball if it counts one
ball as two.
MISSING BALL COUNT 1. Adjust the sensor to make sure it detects the ball.
2. Replace the sensor
BALL RELEASE INACCURATE 1. Adjust ball count sensor towards the ball if it does
not count the ball.
2. Adjust the sensor away from the ball if it counts one
ball as two.
MISSING BALL RELEASE COUNT 1. Adjust the sensor to make sure it “Sees” the ball.
2. Replace the sensor.
COINS UP BUT DOES NOT RELEASE BALLS 1. Replace solenoid.
2. Replace controller.
WILL NOT COIN UP 1. Check the connection at coin comparator.
2 Replace comparator.
3. Replace controller.