STEP 5
STEP 6
STEP 7
Please do not tighten the hardware until the entire assembly is completed.
Tighten All Bolts from step 1 to step 4 by using L-key (I) & (J) that has been provided.
Attached Slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing
with 6 Screw (G), per set using Phillips Head Screwdriver. Securing Slat (7) to Back Side
Rail (5) with 2 Screw (G) per each side as step 5.1. Following by step 5.2, using 1 Screw
(G) to secure Slat (7) to Front Side Rail (4).
Repeat the same step to attach another set of Slat (7).
Attach the Stopper (J) to the front side of Side Panel (2) & (3) each side by
securing with 2 Allen Bolt (A) using L-key (I) to avoid trundle pull out.
4
J
A
I
STEP 5.2
G
7
STEP 5.1
G
7
4
7
5
2
3
