baxter PW1E Скачать руководство пользователя страница 11

Страница: 11 / 20

– 11 –

NOTE:

Programming is based on

Proof cycle completion

Time/Day. The program always starts with

Sunday as the first day for programming. To activate the program, select the arrow button as shown below.

Set CLOCK? >

[NEXT]

Curent Time 8:58 am

If time is correct, then press

NEXT button or arrow button.

If time is not correct, select the

"Set CLOCK?" arrow button to

change time (Fig. 10).

If the program on Sunday is

activated, this screen will display

(Fig. 12).
The next LCD screen displays

time that the program will

be completed for proofing

(Fig. 13).
Press NEXT button or arrow

button.

ACTIVATE Program >

[EXIT] [NEXT]

Sunday Program is

INACTIVE (skipped)

Operator also has the choice to

skip the program on that day by

pressing NEXT button or arrow

button (Fig. 11).

INACTIVATE Program >

[EXIT] [NEXT]

Sunday Program is

ACTIVE (will proof)

Enter the desired time when to

complete Proofing by pressing

"Hours" and "Minutes" arrow

buttons. Keep in mind that hour

or minute is changed by one

arrow button. If the desired

hours or minutes is missed, keep

pressing the arrow button until

the desired time is reached.

Press NEXT button or arrow

button.

[EXIT] [NEXT]

Proofing Complete at

7:00 am Hours >

Minutes >

Fig. 10

Fig. 11

Fig. 12

Fig. 13

Press here to edit time.

Press here to activate or

deactivate the program.

Press here to proceed to

next screen.

Change hours.

Change minutes.

Содержание PW1E





















Результаты поиска

Содержание PW1E

Отзывы:

Бренды по названию

Популярные бренды

baxter PW1E, Руководство оператора

Результаты поиска

Содержание PW1E

Отзывы:

Бренды по названию

Популярные бренды