Baxi SILA RCT MINI, Инструкции по установке, функционированию и обслуживанию

Страница: 55 / 72

55
ENGLISH
9
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
0 10 20 30 40 50 60 70 80 90
P
s
[P
a
]
Q [m
3
/h]
Sila RCT Mini
V3-MAX
V2-MED.
V1-MIN.
FACTORY SETTINGS
ELECTRICAL CONNECTIONS
WARNING: THIS APPLICATION MUST BE EARTHED. ALL WIRING MUST CONFORM TO LEGAL REQUIREMENTS
AND STANDARDS IN THE COUNTRY WHERE THE APPLIANCE IS USED
The unit is suitable for a 230V, 50Hz single phase supply fused at 3A.
The unit needs a mains flexible cord. Connect the cord to the terminal block and exit through a grommet and cable clamp.
A fused spur, or triple pole switch having a minimum contact separation of 3.0mm, must be used to provide isolation for
the unit. The unit is designed to be wired directly to the mains supply through a fused spur isolator which allows it to run
continuously.
FAN PERFORMANCE GRAPH
Remote control Knob position
V.min
. 1
m
3
/h
(% Max flow rate)
V.med. 2
m
3
/h
(% Max flow rate)
V.max. 3
m
3
/h
(% Max flow rate)
BY-PASS
m
3
/h
(% Max flow rate)
Supply Channel 20
(25%)
46
(35%)
72
(60%)
72
(60%)
ExhaustChannel 20
(25%)
46
(35%)
72
(60%)
20
(25%)