Baxi Luna HT Troubleshooting Guide
2
RESETTING UNIT
IF A FAULT OCCURS, THE DISPLAY READS OUT AN ERROR MESSAGE IDENTIFYING IT. NOTE: IF THE
ERROR MESSAGE CONTAINS MORE THAN TWO DIGITS (E.G. E133), THE DISPLAY READS OUT THE FIRST
TWO DIGITS “E1”FOLLOWED BY THE LAST TWO DIGITS “33”.
IF AN ERROR CODE APPEARS YOU WILL NEED TO RESET THE BOILER USING THE TOGGLE SWITCH ON THE
LEFT-HAND SIDE OF THE CONTROL PANEL. TURN THE TOGGLE SWITCH TO THE “R” POSITION (RESET)
FOR THREE SECONDS (FIG. 2.3) AND THEN LET GO. THE TOGGLE SWITCH SHOULD GO TO THE WINTER
MODE POSITION (FIG. 2.1) AND ATTEMPT IT’S SEQUENCE OF OPERATION PROVIDING THERE IS A CALL
FOR HEAT OR DOMESTIC HOT WATER.
